tilemaster Rapid Level 30 Ultra-Rapid Setting Flexible Self Levelling Floor Compound 20kg x 15 bags
U.K Mainland Only
FREE DELIVERY TO 90% U.K. MAINLAND
Contact us for rates to highlands and islands
Rapid Level 30 is an ultra-rapid setting and drying, flexible self levelling floor compound. It has been specially formulated using advanced binder technology and selected additives to provide an underlayment which is ideal for when a genuine, fast-track solution is required. Rapid Level 30 is ready to receive ceramic, porcelain and natural stone tiles after 45 - 60 minutes and impervious floor coverings such as decorative vinyl after 90 minutes. Rapid Level 30 can be applied from depths of 2 - 15mm in one application and it is suitable for use on all common substrates including underfloor heating systems and timber substrates.
COVERAGE: 20kg pack will cover approximately 4.2 sq. metres at 3mm depth
PACK SIZES: 20kg
- Tile after 45 - 60 minutes
- Apply impervious floor finishes after 90 minutes
- Excellent self levelling properties
- Apply from 2 - 15mm in one pour
- Ideal for underfloor heating systems
- Ideal for plywood overlay
- Simply mix with water
- Protein free
- Sand/Cement Screed
- Plywood Overlay (12mm min)
- Chipboard Overlay (18mm min)
- Electric Underfloor Heating
- Water/Wet System Underfloor Heating
- Tile Backer Boards
- Tile on Tile
- Flooring Grade Asphalt & Bitumen
- Anhydrite Screeds
- Fibre Cement Sheet
- Existing Vinyl Tiles
Delivery is by large vehicle with tail lift so suitable access must be avaiable to property. Delivery is within 6-8 working days and you will be contacted with a delivery date.
Note: if a delivery date is agreed and no one is in to receive goods a cost will be incurred for re-delivery
- Apply up to 6mm in one application
- Light Foot Traffic after 3 hours
- Fast Setting, cover after 8 hours
- Simply mix with water
- Protein Free
For smoothing rough and uneven floors and screeds in preparation for laying floor
tiles, vinyl tiles, laminate flooring, carpet and other floor coverings. Self Leveller is only
suitable for use onto solid substrates such as concrete, screed, asphalt/bitumen and
power floated concrete. Self Leveller is fast setting and is ready to receive foot traffic
after 4 hours at 200
C. It is suitable for depths up to 6mm in one application. When
mixed with 3mm dry coarse aggregate at a rate of 10kg to 20kg of Self Leveller, it is
suitable for depths up to 15mm; however, a thin layer of Self Leveller may be required
once set to improve the final finish.
Before starting, all substrates must be clean, dry and strong enough to support the
weight of the leveller, adhesive and the final covering being applied. Remove all dust,
dirt, oil, grease and other contaminants that may affect adhesion. Where traces of
adhesive remain, these must be strong, sound and well adhered to the surface.
Sub-floors directly to earth must have a damp-proof membrane.
20kg pack will cover approximately 12 sq metres at 1mm to 1.5mm solid bed depthh
Write an online review and share your thoughts with other shoppers!