Product Condition: New
NO MORE PLY-Tile Backer Board 1200 x 600 x 6mm
For tiling that looks perfect year in, year out, for years to come
(don't even think about using problematic substrates
like plaster-board, mdf, chipboard, hardboard and, yes, plywood)
No more loose tiles
No more stained grout
No more rotten substrates
It's the way we all did it. Plywood was used for over- boarding floorboards before laying or fixing ceramic tiles. However, this caused problems because if the grouting cracked or the sealant failed, water would creep in and rot the plywood. Also, there was a problem with fungal growth - this often reacted with the adhesive causing the tiles to become loose. The pro's amongst us thought the problem could be overcome by using marine grade plywood, but preservatives in this material migrated through the grout and gave it an orange stain. A minimum of 15mm plywood has to be used for overboarding floorboards - creating, of course, a dangerous step into the tiled room. Now there is a solution to eliminate all these problems. A unique, easy to lay, water resistant tile backer board that's just as effective on the wall as it is on the floor. That's NO MORE PLY.
10 more reasons to use
NO MORE PLY…
Dimensionally stable, unaffected by moisture absorption. The perfect substrate for all tiles in bathrooms and kitchens. Ideal for wet rooms. For total waterproofing use SBR Primer.
Only 6mm is added to the floor height when overboarding timber floors.
Board sizes available: 1200 x 600 x 6mm
Easy To Handle
Handy 1200 x 600 x 6mm size. Will fit
into most small cars and vans.
Always store flat.
Easy To Cut
Most cuts can be done simply with the NO MORE PLY Scoring Knife. For awkward shapes use a jigsaw with a tungsten blade.
Easy To Lay
8 x NO MORE PLY screws per sheet and a small amount of NO MORE PLY Mega Strength Polyurethane Adhesive and it's laid!
Easy to fix on walls
Very Cost Effective
Inexpensive to buy.
Fast to lay.
Minimal damage during transportation, handling, storing and laying - excellent for all busy sites.
Ideal for use most electrical underfloor heating systems.
Contains no asbestos and will not burn.
Excellent sound proofing characteristics make it ideal for overboarding in apartments.
Note: if a delivery date is agreed and no one is in to receive goods a cost of £18 will be incurred for re-delivery
You will require Approximately 1 tube of Megastrength Adhesive per 3 boards.
You will require 1 box of screws per 25 boards
Full Fixing instructions will be supplied
Any questions don`t hesitate to contact us on 01384 401688
May be collected from our shop
Write an online review and share your thoughts with other shoppers!