ORDER BY PHONE

01384 401688

Lithofin MN Stain-Stop W 1L Tile Sealer/impregnator for stone,concrete,slate etc

OUR PRICE: £27.46
Stock Status: In Stock
Product Brand: lithofin
Product Code: 5.95
Product Condition: New
You Will Earn 27 points which is the equivalent of £0.54
  • DESCRIPTION
  • REVIEWS

Lithofin StainStop W 1l

Description This special impregnator effectively protects surfacesagainst the penetration of oil, grease, dirt and water, and itlargely prevents staining. The product penetrates into thesurface and forms an extremely thin, invisible film in thecapillaries. The appearance of the treated surface is eitherunaffected or only slightly altered.Durability: up to to four years depending on the type anduse of the treated material. The product is UV resistant anddoes not yellow.

Field of UseFacilitates maintenance on stain sensitive surfaces, such asfloors in kitchens and dining areas, tables, counter tops etc.Surfaces can be polished, honed or rough. Suitable forindoor and outdoor use.Surfaces: many natural stones, such as polished and roughhard stones, rough and honed limestone and concretestone, terracotta, absorbent unglazed tiles, etc.Please Note: the suitability of the product for marble andother acid sensitive stones with a polished surface and alltypes of fully vitrified ceramic tiles should be confirmed priorto use.

Directions for UseThe surface should be completely dry, clean and free ofstains. Shake the bottle before use.Apply generously and evenly using a mop, brush, roller orsponge. Ensure the material is evenly distributed onpolished surfaces by wiping over several times. LithofinSTAINSTOP >W< can also be applied with a garden pumpspray and then be distributed evenly with a wide brush.Highly absorbent surfaces should receive a secondapplication after approx. 20 minutes. Avoid puddles anddrips which should be wiped away immediately. Ensure thatall surplus product is removed, do not allow it to dry on thesurface. Clean all tools with water immediately after use.Drying Time: the full effect will be achieved after 48 hours.Keep the surface free of water and oil during this time.Please Note: some materials may appear slightly darkerafter treatment. We recommend an initial trial application.Always treat the entire surface in a room. The product doesnot protect against acid ingress. Remove splashes on wood,glass, PVC, lacquered surfaces and mastic filled joints witha cloth.Application Temperature: 10°C to 25°C.Coverage: absorbent surfaces (e.g. sandstone) approx.7m²/L, rough c

Sold and dispatched by Wide Range Tiles est 1981


Customer Reviews
Write an online review and share your thoughts with other shoppers!