A special product from the LITHOFIN-Range for
marble and natural stone (MN).
Solvent free emulsion based on natural waxes,
high quality polymers as well as cleaning and
Lithofin MN Care-Sheen forms an easy-to-polish
protective film and enhances the appearance of the
surface by slightly intensifying the colour structure.
Field of Use
For touching up and protecting polished marble and
granite floor surfaces, which have become matt or
dull. Lithofin MN Care-Sheen contains cleaning
substances and can be used for regular maintenance
on surfaces subject to low levels of wear and tear.
Also suitable as an initial treatment of rough and
honed surfaces where a satin gloss is required. For
indoor use only
Directions for Use
When using Lithofin MN Care-Sheen as an initial
treatment, dilute the product 1:1 with water and apply
it to the surface with a clean cloth or sponge. After
approx. 30 to 40 minutes the surface can be polished
by hand or machine. For touching up and
maintenance use one cup of Lithofin MN Care-Sheen
per 10 litres of wiping water. On worn surfaces use a
Do not walk on the surface until the product has dried.
Drying Time: approx. 30 to 40 minutes.
Coverage: approx. 200m² per litre when used in
wiping water, approx. 20m² when used undiluted.