A special product from the LITHOFIN-Range for
marble, natural and concrete stone (MN).
Solvent free dispersion based on robust acrylates
and hard waxes
Lithofin MN Care-Seal forms a self-glossing protective
film on the surface. This film enhances the
appearance of the surface by refreshing the colour
structure. The surface also becomes less sensitive
Field of Use
For touching up and protecting polished marble and
granite surfaces, which have become matt or dull.
Also suitable as an initial treatment of rough and
honed surfaces where a satin gloss is required.
For occasional use on indoor surfaces
Directions for Use
The surface to be treated and tools to be used must
be clean and dry.
As initial treatment: dilute Lithofin MN Care-Seal
approx. 1:5 with water, apply evenly with a cloth,
sponge or lambswool wiper and allow to dry for
approx. 30 to 40 minutes. The gloss level can be
increased through polishing by hand or by machine.
Absorbent or dull surfaces can be treated undiluted.
For touching up: occasionally use one cup of Lithofin
MN Care-Seal per 10 litre bucket of wiping water.
Please Note: do not walk on the surface until the
product has dried. On surfaces subject to heavy wear
and tear, the treatment must be repeated from time to
We recommend occasionally cleaning with Lithofin
MN Power-Clean in order to remove all product
residues from the surface. Try the product in an
inconspicuous area prior to use.
Coverage: approx. 20 to 30m² per litre when used as
a sealant, up to 200m² per litre when used in wiping