ORDER BY PHONE

01384 401688

Lithofin KF Tile Polish 1L Ceramic/Quarry Sealer

OUR PRICE: £11.89
Stock Status: In Stock
Product Brand: lithofin
Product Code: 6.60
Product Condition: New
You Will Earn 11 points which is the equivalent of £0.22
  • DESCRIPTION
  • REVIEWS

Lithofin KF Tile Polish 1Litre Unglazed Ceramic and Quarry Sealer. Leaves an ellegant sheen.

Description

A special product from the LITHOFIN-Range for

porcelain, ceramic and quarry tiles (KF). The solvent

free acrylate sealant can be diluted with water and is

easy to use.

Properties

Once dry, Lithofin KF Tile Polish forms a film that

gives dull, matt and rough surfaces an ellegant sheen.

Dirt will no longer penetrate into the surface and can

easily be wiped away. Rough surfaces become

smoother and therefore easier to maintain. The film

protects the surface, while at the same time

enhancing its appearance by slightly darkening the

colours. Existing marks of wear and tear are masked

and become less visible.

Technical Data:

Density: approx. 1.0 g/cm³

pH-Value: approx. 9

Appearance: milky-white

Odour: nearly odourless

Field of Use

Lithofin KF Tile Polish has been specifically developed

for ceramic surfaces, such as unglazed, quarry and

clay tiles. The surface film enhances the appearance

and facilitates maintenance. Lithofin KF Tile Polish is

not recommended for outdoor areas and for surfaces

subject to heavy wear and tear. Not suitable for

glazed and polished tiles.

Directions for Use

The surface must be clean and completely dry.

Remove dirt deposits and old care product residues

with the suitable LITHOFIN cleaner.

Evenly apply Lithofin KF Tile Polish in undiluted form

using an applicator, sponge or lint free cloth. The

product may be used diluted with water, if the surface

is not very absorbent.

The amount of product to be applied depends on the

absorbency of the tile; make sure you leave a clearly

visible film of moisture on the surface. A second coat

can be applied, if needed. In cases of doubt, test in an

inconspicuous area.

Drying Time: surface will be dry after approx. 40 to 60

minutes, depending on temperature and humidity.

Coverage: approx. 15 to 20m² per litre depending on

surface.

Further Care

Occasionally add Lithofin KF Tile Polish to the

cleaning water (one cup per ten litres) to touch up and

maintain the protective film.

Storage

Closed and cool, frost free. Shelf life of up to 3 years.

Environmental Protection

The contained surfactants are biologically degradable

according to EU-regulations. Does not contain any

phosphates.

Disposal: diluted product may be added to waste

water. Containers are made of environmentally

friendly polyetylene (PE). Clean containers can be

recycled through collection system.

Safety

Contents: non-ionic surfactants (<5%), polymers,

auxiliary agents.

General Information: Keep out of reach of children. No

health concerns once dry.

First Aid Procedures: remove contaminated soaked

clothing immediately. No special measure necessary.

In case of contact with skin wash off immediately with

soap and water. In case of contact with eyes rinse

thoroughly with plenty of water and seek medical

advice. In case of ingestion, do not induce vomiting. If

swallowed by mistake drink plenty of water and seek

medical treatment.

Emergency Procedures: in case of spill or other

release, take up with absorbent material (e.g. sand,

sawdust, general-purpose binder).

In case of fire formation of dangerous gases possible.

Product does not burn, fire-extinguishing activities

according to surrounding.


Customer Reviews
Write an online review and share your thoughts with other shoppers!