ORDER BY PHONE

01384 401688

Warmup DWS Underfloor Wire Heating Kit for Tiled Floors Including Thermostat

Warmup DWS Underfloor Wire Heating Kit for Tiled Floors Including Thermostat
Warmup DWS Underfloor Wire Heating Kit for Tiled Floors Including Thermostat
Warmup DWS Underfloor Wire Heating Kit for Tiled Floors Including Thermostat
Warmup DWS Underfloor Wire Heating Kit for Tiled Floors Including Thermostat
Warmup DWS Underfloor Wire Heating Kit for Tiled Floors Including Thermostat
OUR PRICE: £173.46
Stock Status: In Stock
Product Code: warmupwire_3-1_1-1
Product Condition: New
Size
Thermostat
You Will Earn 173 points which is the equivalent of £3.46
  • DESCRIPTION
  • REVIEWS
Warmup® DWS Wire Heater Kit for Tiled Floors

Warmup DWS Wire Heater Including digital thermostat (you can choose between The New Tempo Stat in white or Black or a touch screen 3ie stat in Piano Black,Classic Cream, Silver Grey, Madison Blue, Leaf Green, Warm Berry or Deep Pink)

For Tiled Floors

Comes with a Lifetime Warranty

Just choose the amount you require and the type of thermostat.
If in doubt call us or e.mail us for advice

Warmup® Loose Wire System for Tile & Stone Floors (DWS)

We design our systems using a 2mm, ultra-thin, dual-core heating element. The small cross-section of our element allows it to be installed in a matter of hours without raising floor levels.

There is no need to dig up the floor and no need to mix concrete. Simply fix our heating element to the subfloor, tile straight over and say goodbye to cold feet for good!

Kit Comprises: Primer, roller, heater, tape and instructions, we also include the thermostat of your choice.

Underfloor Heating Information - The Concept & Advantages

The comfort and luxury of radiant floor heating – made easy and affordable!

Warmup® Underfloor Home Heating Systems give you freedom of choice.

The underfoor heating element is as thin as a dime, so it will not affect floor levels. It goes where you need it, so you can fit it into bathrooms, kitchens, conservatories or any other room in your house.

The flexible design makes it easy to work around existing fixtures or cramped floor layouts.

Installing electric underfloor heating takes only a few hours. There’s no need to dig up the floor and no messy concrete work - best of all you won’t need specialised tools or skills.

Just tape the underfloor heating element to the floor. Tile over it and voilà - you have heated floors. It’s as simple as that.

The programmable Warmup® XSTAT Thermostat automatically regulates the floor temperature. You can use the unobtrusive Warmup® Underfloor Heating System as your primary heating source, or just to keep the chill off the floor.

 

Running Cost Information

How much will it cost to heat my room?

Running costs will always depend on the room size and the running time, as well as how well the room is insulated. To get an accurate idea of typical running costs, see the table and notes below:

Daily cost (in pence) of running a
Warmup® Heating System as sole-source heating:



Heated area in square metres

Hours 2m2 4m2 5m2 10m2 15m2 25m2
1 1.5p 3.0p 3.7p 7.5p 11.2 18.7p
2 2.7p 5.4p 6.8p 13.6p 20.4p 34.0p
3 4.0p 7.9p 9.9p 19.7 29.6p 49.3p
4 5.1p 10.2 12.8 25.6 38.4p 64.0p
5 6.4p 12.8p 16.0p 32.0p 48.0p 80.0p
6 7.6p 15.1p 18.9p 37.7p 56.6p 94.4p
7 8.8p 17.6p 22.0p 44.0p 66.0p 110.0p
8 10.0p 20.0p 25.0p 50.0p 75.0p 125.0p

Save money by insulating properly and reducing heat-up times:

During the heat-up period, as the floor reaches its set temperature, the heater is running at full power. After this period, the heater needs to run at only half-power to maintain the set temperature. Simply put, the faster the floor heats-up, the cheaper the system is to run.

By properly insulating your floor with Warmup® Insulation Board, you can reduce the heat-up period significantly thereby reducing running costs by as much as 50%.

Accuracy of running costs:

Warmup tested its heaters, running under normal operating conditions, in a special room built to EN442-2 specifications. The data collected from this extensive testing allows to state with certainty, exactly what our operating costs are.
Please note that these tests were performed using Warmup® heaters and that this data is accurate for Warmup® heaters only.

Assumptions and variables:
To calculate accurate running costs, we have made the following reasonable assumptions:
1. Installation is in a house built to current Part L regulations
2. Heaters used: 150W/m² mats, under 8-10mm ceramic tile on 10mm Warmup® Insulation Board
3. The temperature difference between "on" and "standby" is 5°C (eg. 16°C when on "standby", 21°C when "on")
4. The floor coverage is consistent to property size (eg. 5m² of heating for a 5m² room)
5. The heat-up time is included within the hours ON
6. The heating is controlled by Warmup® XSTAT
7. Price per kWh is 8p (average UK electricity price at time of printing)

Thermostat Information

You have a choice of two different types of thermostat they are:

Programmable Tempo thermostat in white or black

tempo™ is a digital programmable thermostat featuring a modern design and intuitive interface. Suitable for all Warmup electric underfloor heating systems, it allows you to program start and end heating times to reach your comfort temperature in a few simple steps. tempo™ can operate on a weekly, 5-2 day or daily basis to match with your needs and requirements.
Better easy-to-use interface & intuitive design
  • Stylish and contemporary design
  • Clear screen displaying program details, room temperature and current time
  • Easy control with dial and sliders
Faster setup takes just minutes to get right the first time
  • In just a few steps, adjust the program settings to suit individual’s needs
  • A mode for every need: manual, automatic and frost protection
  • Comfort temperature can be changed easily at any time
Smarter control of your energy costs
  • Adaptive learning function sets off the temperature required at the good time
  • No waste of energy, heating only when required
  • Perfect control enables saving on energy bills

3iE Programmable Thermostat

Features & Benefits - 3iE Programmable Thermostat
Innovative
  • first touch-thermostat with a 2” full-colour screen
  • first thermostat with Active Energy Management™
  • easy-to-use user interface - no instructions required
  • works with any Warmup underfloor heating system

interactive

  • graphical display of your program makes adjustment quick and easy
  • choose the display type that suits you best; wide choice of screen themes

intelligent

  • automatically adjusts to changing conditions in your room, your home and even the seasons, to give optimal start-up times - no wasted energy (self-learning Proportional Adaptive Function)
energy-efficient

  • exclusive - Active Energy Management™ can save you up to 10% or more on your energy bill
  • real-time graphical display shows you exactly how much energy you are using and when
  • thermostat actively prompts you to choose the best and most efficient temperature for your room for maximum savings
  • super-accurate floor temperature control reduces the costs associated with over and under-heating (no wasted energy)
Installation
The Warmup Loose Wire System has been designed so that installation is quick and easy. However, as with all electrical underfloor heating systems, certain procedures must be followed. Ensure you have read all technical specifications and you are happy to fit Warmup Loose Wire Underfloor Heating to your room. To install your Warmup Underfloor Heating system follow these 4 steps. Please note that this is a summary. More detailed instructions can be found in the Loose Wire Installation Manual
STEP 1
Smooth, clean and dry the subfloor surface. Paint the floor with Warmup Primer (you do not need to use primer if installing on an insulated tile back board). The light green colour of the primer will change to a dark green once dry. Avoid traffic once primer is down.
STEP 2
Calculate in square metres the size of the area to be heated. Use the Sizing Guide (found in the back of the Installation Manual) to correctly fit your heating wire into the space provided. Layout the heating wire in parallel lines. Begin at the start point and in U shapes go to the furthest point. Using the wire spacing markings as tape down points, secure the heating wire to the floor with adhesive tape. Once completed, tape down the entire length of the heating wire, positioning the tape centrally over the wire.
STEP 3
Follow the instructions supplied with your thermostat. Your underfloor heating system will not function without a correctly installed thermostat.
STEP 4
Check if the heating wire is fully taped and secured. Grout the floor as soon as possible as per the manufacturers’ instructions. Tile as normal, taking care not to damage or dislodge the heating wire.
  • The heater can be installed without the need for specialist tools or expertise (in accordance with local building code). It is important, however, that the Warmup Thermostat be connected by a qualified electrician.
We are an approved Warmup e.Commerce Partner so have the full backup of Warmup and are able to offer the appropriate warranties


Customer Reviews
Write an online review and share your thoughts with other shoppers!