ORDER BY PHONE

01384 401688

tilemaster water mixed Self Levelling Compound 20kg x 20 bags Free Delivery

OUR PRICE: £220.46
Stock Status: In Stock
Product Condition: New
You Will Earn 220 points which is the equivalent of £4.40
  • DESCRIPTION
  • REVIEWS

tilemaster water mixed Self Levelling Compound 20kg x 20 bags

Leveller
FREE DELIVERY

U.K Mainland Only

FREE DELIVERY TO 90% U.K. MAINLAND

Contact us for rates to highlands and islands

Leveller is a fast setting, cement based formulation for smoothing rough and uneven floors in preparation for laying a new floor covering. Leveller provides an ideal base

for many floor coverings. Leveller can be applied to a depth of 6mm in one application, when mixed with coarse sand or 3mm aggregate, Leveller can be applied to a

depth of 15mm. Used as instructed, Leveller will start to cure after 90 minutes and is ready to receive light foot traffic after 3 hour

Delivery is by large vehicle with tail lift so suitable access must be avaiable to property. Delivery is within 6-8 working days and you will be contacted with a delivery date.

Note: if a delivery date is agreed and no one is in to receive goods a cost will be incurred for re-delivery

Product Overview:
  • Apply up to 6mm in one application
  • Light Foot Traffic after 3 hours
  • Fast Setting, cover after 8 hours
  • Simply mix with water
  • Protein Free
USES:
For smoothing rough and uneven floors and screeds in preparation for laying floor
tiles, vinyl tiles, laminate flooring, carpet and other floor coverings. Self Leveller is only
suitable for use onto solid substrates such as concrete, screed, asphalt/bitumen and
power floated concrete. Self Leveller is fast setting and is ready to receive foot traffic
after 4 hours at 200
C. It is suitable for depths up to 6mm in one application. When
mixed with 3mm dry coarse aggregate at a rate of 10kg to 20kg of Self Leveller, it is
suitable for depths up to 15mm; however, a thin layer of Self Leveller may be required
once set to improve the final finish.
SURFACE PREPARATION:
Before starting, all substrates must be clean, dry and strong enough to support the
weight of the leveller, adhesive and the final covering being applied. Remove all dust,
dirt, oil, grease and other contaminants that may affect adhesion. Where traces of
adhesive remain, these must be strong, sound and well adhered to the surface.
Sub-floors directly to earth must have a damp-proof membrane.

Coverage:

20kg pack will cover approximately 12 sq metres at 1mm to 1.5mm solid bed depthh


Customer Reviews
Write an online review and share your thoughts with other shoppers!