Product Code: 6.60
1st step of the CLASSIC method: works as a base before the final treatment. Determines the later colour shade of the finish, and makes even application of Lithofin Classic Wax easier. Also renders the surface water repellent.
A special product from the LITHOFIN-Range for terracotta(TC). The ready-to-use primer contains silicone- and acrylate resins carried in organic solvents.Properties:Penetrates into porous surfaces and reduces their absorbency. This treatment renders the surface water repellent and is the precondition for treatment with Lithofin TC Classic Wax
Technical Data:Density: approx. 0.85 g/cm³pH-Value: n.a.Flash Point: < 21°C (c.C.)Appearance: liquid, brownishOdour: aromaticSolubility in Water: not soluble
Field of Use:For priming absorbent terracotta and cotto surfaces, especially Italian cotto. This treatment is the first step of the so called "classic" method for treating terracotta.
This treatment is not suitable for non-absorbent surfaces and is for indoor use only.Directions for Use:The surface to be treated must be completely dry and clean.
Shake well before use. Try the product in an inconspicuous area in order to evaluate the effect. Work in small sections 1-2m² and evenly apply the undiluted product with a sponge or foam roller distribute immediately, removing all excesses. Allow to dry for one hour and then apply a second coat, as above, if required.
Allow to dry for approx. 4 hours after the final coat then begin application of Lithofin TC Classic Wax.Please Note: apply the product only after the silcone joints have been fixed..
Application Temperature:The temperature of the surface should be between 10°C and 25°C. Switch off under floor heating.Drying Time:approx. 3-4 hours before further treatment. Fully cured after 3 days.
Write an online review and share your thoughts with other shoppers!