ORDER BY PHONE

01384 401688

Lithofin StainStop PLUS Sealer & Colour Intensifier 1L

OUR PRICE: £36.95
Stock Status: In Stock
Product Code: 19.41
You Will Earn 36 points which is the equivalent of £0.72
  • DESCRIPTION
  • REVIEWS

Lithofin Stainstop PLUS 1L

This special impregnator protects against staining, intensifies the colour structure and facilitates maintenance. Suitable for absorbent rough to honed and even polished natural- and artificial stone surfaces.

• especially suiatble for rough surfaces
• for indoor and outdoor use
• no gloss
• long-term effect
• contains solvents

Coverage: approx. 6-15m²/L
Packaging: 500ml, 1L, 5L

Dispatched same day via APCNext day delivery if payment received before 1pm.

Please note: We ship via APCas it is illegal to send hazardous materials through Royal Mail. So our postage charges may appear more than some of our competitors who do not have relevant insurance and carriers in place.

Description

A ready-to-use special product from the LITHOFIN-Range for

ceramic, natural- and engineered stone.

Lithofin Stainstop PLUS contains high-quality water and oil

repellent agents based on siloxanes and dissolved in solvents.

Special additives permanently intensify the colour structure.

Properties

Lithofin Stainstop PLUS sinks into the stone and reduces the

capillary absorbency so water, oil and grease can no longer

penetrate the surface. These materials remain on the surface

and can be wiped off before they cause stains. In addition to

protecting the stone, Lithofin Stainstop PLUS darkens it thereby

invigorating the colour structure.

Field of Use

For making absorbent ceramic, terracotta, natural- and

engineered stone surfaces stain resistant while at the same

time intensifying their colour structure. Highly suitable for weak

to medium absorbent natural stones like granite, gneiss,

quartzite, slate and limestone with rough to honed surfaces.

Conditionally suitable for polished stones.

Please Note: impregnated surfaces can not be treated.

Marble and limestone remain sensitive to acid.

Directions for Use

Always test the product in an inconspicuous area prior to

application. The surface to be treated must be completely dry,

clean and free of stains. Apply Lithofin Stainstop PLUS with a

brush, a roller or a cloth. The surface should be uniformly wet.

On very absorbent surfaces, this procedure may have to be

repeated within five minutes.

Attention! The liquid product must penetrate into the surface.

Rough surfaces: residues and foam should be evenly

distributed before drying, but not completely dried off.

Surface should appear wet.

Polished surfaces: carefully wipe product off, do not allow

residues to dry. On large areas, remove the product residues

with a squeegee and buff the surface with a machine and a

white pad. If product has started to dry, put some Lithofin

Stainstop PLUS and wipe the surface.

Check all surfaces for a uniform appearance, if necessary

immediately apply more Lithofin Stainstop PLUS.

The product can not be removed once dry.


Customer Reviews
Write an online review and share your thoughts with other shoppers!