Product Code: 5.95
Lithofin MN Wash & Clean 1L
A special product from the LITHOFIN-Range for
marble, natural and engineered stone (MN).
Lithofin MN Wash & Clean is a high-yielding cleaning
and maintenance concentrate, which contains active
maintenance components and mildly alkaline cleaning
agents based on natural soaps.
Density: 1,0 g/cm³
pH-Value: approx. 10 (concentrate)
Appearance: viscous, yellowish
Solubility in Water: complete
Highly effective agents take up the dirt and so it can
easily be removed by wiping. The remaining
extremely thin care film is free of wax and does not
build any layers. With continued use, the surface’s
appearance will improve in colour and structure.
Lithofin MN Wash & Clean leaves a pleasant odour.
Field of Use
For regular maintenance cleaning of all marble and
natural stone surfaces.
Surfaces: all natural stones such as carrara,
travertine, jura marble, porphyr, serizzo, sandstone
as well as engineered stone. The surfaces can be
polished, honed or rough, impregnated sealed or
Directions for Use
Lithofin MN Wash & Clean is always added to
lukewarm water. One squirt (approx. 20ml) per 10
litres of water.
In case of absorbent, dirty surfaces use a bit more.
After wiping, allow the residues to dry on the surface,
do not rinse with clear water. Use either a floor mop,
cloth or cleaning machine for wiping.
Coverage: Lithofin MN Wash & Clean is a high-yielding
concentrate and very economical. On large areas
which are machine cleaned daily approx. 3 litres
per 100m² will be needed per month.
Advice: in areas subject to heavy wear and tear and
on very dirty surfaces, it may be necessary to
occasionally use Lithofin MN Power-Clean.
Natural stone floors should be wiped regularly.
Especially on polished marble, we recommend using
Lithofin MN Wash & Clean three to four times,
then using Lithofin MN Care-Sheen once.
Write an online review and share your thoughts with other shoppers!