Product Code: 6.44
Lithofin MN Power Clean 1Litre for natural and artificial stone
A special product from the LITHOFIN-Range for
marble, natural and engineered stone (MN). Lithofin
MN Power-Clean is a mildly alkaline product, which
contains a balanced mixture of cleaning components
which guarantee optimal performance.
Density: approx. 1,0 g/cm³
Appearance: liquid, colourless, clear
pH-Value: approx. 10
Flash Point: n.a.
Solubility in Water: complete
This special cleaner is nearly odourless and highly
economic. Lithofin MN Power-Clean removes grease
and oil, all kinds of general and ingrained dirt as well
as floor polish residues, old acrylic emulsions, care
Field of Use
For thoroughly cleaning used or exceptionally dirty
natural stone surfaces and for initially cleaning newly
laid surfaces. Suitable for use on polished, finely
honed and rough marble and other natural stones.
Facilitates removing cement residues from polished
marble. Suitable for indoor and outdoor use.
Directions for Use
Apply and evenly distribute Lithofin MN Power-Clean
as supplied or diluted up to 1:5 depending on the
nature of the dirt. Allow the product to work for 10 to
20 minutes; brush occasionally. Do not allow to dry,
add water if necessary. Brush again before wiping up.
On large areas, use a squeegee to remove the
product. Wash the surface thoroughly with clean
water. If the result is not satisfying, repeat allowing the
product to work longer and brushing more vigorously.
Please Note: avoid splashes on sensitive areas such
as metal or wood, painted or varnished surfaces, wall
paper, etc. We highly recommend trying the product in
an inconspicuous area prior to use.
as supplied: approx. 5 to 10m² depending on dirt
diluted: up to 30m²
Advice: for removing wax layers and the like, we
recommend Lithofin WAX-OFF. For cement residues
and rust discolourations on granite and gneiss, use
Lithofin MN Builder’s Clean.
Keep closed, cool and dry. Not above 25°C.
Shelf life of up to three years.
Surfactants are biologically degradeable in
accordance with EU-regulations. Free of phosphates.
Disposal: diluted product may be added to waste
water. Containers are made of environmentally
friendly polyethylene (PE). Clean containers can be
recycled through collection systems.
Contents: non-ionic surfactant; solubilizer; auxilliary
Risk and Safety Phrases: irritating to eyes. Keep out
of the reach of children. In case of contact with eyes,
rinse immediately with plenty of water and seek
medical advice. If swallowed, seek medical advice
immediately and show container or label.
First Aid Procedures: in case of inhalation ensure
fresh air. In case of contact with skin wash off
immediately with soap and water. In case of contact
with eyes rinse thoroughly with plenty of water and
seek medical advice. Do not induce vomitting. If
swallowed by mistake drink plenty of water and seek
Write an online review and share your thoughts with other shoppers!