Product Code: 6.32
Product Condition: New
Lithofin KF Ceramic-Clean 1Litre
A special product from the LITHOFIN-Range for
ceramics, quarry tiles, slate and porcelain. Lithofin KF
Ceramic-Clean is a high-yielding concentrate based
on a proven and balanced combination of active acids
and high quality cleaning compounds. The product
works thoroughly yet mildly, does not leave any
residues and has a pleasant smell.
Lithofin KF Ceramic-Clean removes surface residues
such as calcium, lime and dirt deposits, soap scum
and greasy residues, rust, etc. The surfaces will
gleam without polishing and the pleasant odour
emphasizes the hygienic cleanliness.
Field of Use
For every-day maintenance cleaning in bathrooms,
showers, toilets as well as kitchens. Lithofin KF
Ceramic-Clean is suitable for ceramic tiles, grouting,
chrome, stainless steel, glass and many types of
plastics. Not suitable for polished marble and
Directions for Use
Depending on the stubbornness of the dirt, dilute the
product up to 1:15 and apply it to the surface with a
brush or sponge. On small surfaces, simply put a
squirt of Lithofin KF Ceramic-Clean on a wet sponge.
Allow the product to work briefly, then rinse well with
water. In case of very stubborn dirt deposits, use the
Please Note: do not use on acid sensitive surfaces
such as polished marble and limestone, enamel,
certain decorative tiles, etc. In cases of doubt, try the
product in an inconspicuous area prior to use.
Coverage: 10 to 20m² per litre on stubborn dirt, up to
100m² when used for regular cleaning.
Advice: for regular maintenance of ceramic floors we
recommend Lithofin EASY-CARE. In case of black
mould and mildew use Lithofin KF Mildew-Away.
Keep closed and cool.
Shelf life of up to five years.
The contained surfactants are biologically degradable
according to EU-regulations. Free of phosphates.
Disposal: diluted product may be added to waste
water. Containers are made of environmentally
friendly polyetylene (PE). Clean containers can be
recycled through collection system.
Contents: acids; non-ionic surfactants; auxiliary
Risk and Safety Phrases: irritating to eyes and skin.
Keep out of the reach of children. Do not breathe
spray. In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
If swallowed, seek medical advice immediately
and show this container or label.
Use only in well-ventilated areas.
First Aid Procedures: remove contaminated soaked
clothing immediately. In case of inhalation, ensure of
fresh air. In case of contact with skin wash off
immediately with soap and water. In case of contact
with eyes rinse thoroughly with plenty of water and
seek medical advice. In case of ingestion, do not
induce vomiting. If swallowed by mistake drink plenty
of water and seek medical treatment.
Emergency Procedures: in case of spill or other release,
take up with absorbent material (e.g. sand, sawdust,
general-purpose binder). Ensure adequate ventilation.
Product does not burn, fire-extinguishing activities
according to surrounding.
Additional Information is listed on the Material Safety
corrosive liquid, n.o.s.
UN 1760, Class 8
Packaging Group III
1 litre bottle with child-proof cap (10 per box)
Write an online review and share your thoughts with other shoppers!